Difference between revisions of "KVM"
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== Installation Guides == | == Installation Guides == | ||
*[https://www.howtoforge.com/virtualization-with-kvm-on-a-debian-squeeze-server Debian 7/8 ] | *[https://www.howtoforge.com/virtualization-with-kvm-on-a-debian-squeeze-server Debian 7/8 ] | ||
| Line 63: | Line 56: | ||
Confirm bridge is listed and working: | Confirm bridge is listed and working: | ||
brctl show | brctl show | ||
| + | |||
| + | == Virsh Commands == | ||
| + | List all VM: | ||
| + | virsh -c qemu:///system list | ||
| + | |||
| + | Auto Start: | ||
| + | virsh autostart vmName | ||
Latest revision as of 22:10, 22 March 2019
Contents
Installation Guides
Example of /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet manual
# Management IP Address
auto br0
iface br0 inet static
address 192.168.1.2
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
bridge_ports eth0
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_stp off
dns-nameservers 8.8.8.8
dns-search ggeng.triumf.ca
# Unused
auto br1
iface br1 inet static
address 0.0.0.0
bridge_ports eth1
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_stp off
Restart the network:
systemctl restart network
Manually adding bridges
Create a bridge that is not listed in /etc/network/interfaces
brctl addbr br1
Assign Ethernet to bridge:
brctl addif br1 eth1
Confirm bridge is listed and working:
brctl show
Virsh Commands
List all VM:
virsh -c qemu:///system list
Auto Start:
virsh autostart vmName
