Enabling Client DHCP - Revision history

Maddog187: /* Enabling DHCP with Hostname */

2006-03-19T01:29:07Z

‎Enabling DHCP with Hostname

Maddog187: /* Enabling DHCP with Hostname */

2006-03-19T01:27:09Z

‎Enabling DHCP with Hostname

Maddog187: /* Enabling DHCP with Hostname */

2006-03-19T01:24:31Z

‎Enabling DHCP with Hostname

Maddog187: /* Enabling DHCP with Hostname */

2006-03-19T01:24:01Z

‎Enabling DHCP with Hostname

Maddog187: /* Enabling DHCP with Hostname */

2006-03-19T01:23:08Z

‎Enabling DHCP with Hostname

Maddog187: /* Enabling DHCP with Hostname */

2006-03-19T01:21:50Z

‎Enabling DHCP with Hostname

Maddog187: /* Enabling DHCP with Hostname */

2006-03-19T01:21:06Z

‎Enabling DHCP with Hostname

Maddog187 at 01:19, 19 March 2006

2006-03-19T01:19:58Z

New page

==== Enabling DHCP with Hostname ====

#To set the hostname, do the following:
#*<pre>vi /etc/sysconfig/network</pre>
#Edit /etc/sysconfig/network to look like the following:
#*<pre> NETWORKING=yes</pre>
#*<pre>HOSTNAME={hostname}.hypersecuresolutions.com</pre>
# Save and exit.
#Then edit your ifcfg-eth0 config file with the following command:
#*<pre> vi /etc/sysconfig/network-scripts/ifcfg-eth0
#Edit /etc/sysconfig/network-scripts/ifcfg-eth0 to look like the following:
#*<pre>DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:E0:81:63:99:81 # This line is different for every card
ONBOOT=yes
TYPE=Ethernet
DHCP_HOSTNAME={hostname}
USERCTL=no
PEERDNS=yes
IPV6INIT=no</pre>
#Save and exit.
#Next, type in the following on the command promt to set hostname:
#*<pre> hostname {hostname}.hypersecuresolutions.com</pre>

@@ Line 10: / Line 10: @@
 #*<pre> vi  /etc/sysconfig/network-scripts/ifcfg-eth0
 #Edit /etc/sysconfig/network-scripts/ifcfg-eth0 to look like the following:
-#*<pre>DEVICE=eth0
+#*<pre>DEVICE=eth0</pre>
-#*<pre>BOOTPROTO=dhcp
+#*<pre>BOOTPROTO=dhcp</pre>
-#*<pre>HWADDR=00:E0:81:63:99:81 # This line is different for every card
+#*<pre>HWADDR=00:E0:81:63:99:81 # This line is different for every card</pre>
-#*<pre>ONBOOT=yes
+#*<pre>ONBOOT=yes</pre>
-#*<pre>TYPE=Ethernet
+#*<pre>TYPE=Ethernet</pre>
-#*<pre>DHCP_HOSTNAME={hostname}
+#*<pre>DHCP_HOSTNAME={hostname}</pre>
-#*<pre>USERCTL=no
+#*<pre>USERCTL=no</pre>
-#*<pre>PEERDNS=yes
+#*<pre>PEERDNS=yes</pre>
 #*<pre>IPV6INIT=no</pre>
 #Save and exit.
 #Next, type in the following on the command promt to set hostname:
 #*<pre> hostname {hostname}.hypersecuresolutions.com</pre>

@@ Line 1: / Line 1: @@
 ==== Enabling DHCP with Hostname ====
-#To set the hostname, do the following:
+* To set the hostname, do the following:
-#*<pre>vi  /etc/sysconfig/network</pre>
-#Edit /etc/sysconfig/network to look like the following:
+ vi  /etc/sysconfig/network
-#*<pre> NETWORKING=yes</pre>
-#*<pre>HOSTNAME={hostname}.hypersecuresolutions.com</pre>
+* Edit /etc/sysconfig/network to look like the following:
-# Save and exit.
-#Then edit your ifcfg-eth0 config file with the following command:
+ NETWORKING=yes
-#*<pre> vi  /etc/sysconfig/network-scripts/ifcfg-eth0
+ HOSTNAME={hostname}.hypersecuresolutions.com
-#Edit /etc/sysconfig/network-scripts/ifcfg-eth0 to look like the following:
   DEVICE=eth0
   BOOTPROTO=dhcp
@@ Line 19: / Line 27: @@
   PEERDNS=yes
   IPV6INIT=no
 *Save and exit.
-Next, type in the following on the command promt to set hostname:
+* Save and exit.
   hostname {hostname}.hypersecuresolutions.com